Huawei Quidway S3100 Series Operation Manual Download Page 354

Page: 354 / 514

Operation Manual – Stack&Cluster
Quidway S3100 Series Ethernet Switches

Chapter 2 Cluster

Huawei Technologies Proprietary

2-2

Software upgrading and parameter configuring can be performed simultaneously

on multiple switches.

Free of topology and distance limitations

Saving IP address resource

HGMP V2 provides the following functions:

Topology discovery: HGMP V2 implements NDP (neighbor discovery protocol) to

discover the information about the directly connected neighbor devices, including

device type, software/hardware version, connecting port and so on. The

information such as device ID, port mode (duplex or half duplex), product version,

and BootROM version can also be given.

Topology information collection: HGMP V2 implements NTDP (neighbor topology

discovery protocol) to collect the information about device connections and

candidate devices within a specified hop range.

Member recognition: A management device can locate and recognize the member

devices in the cluster and then deliver configuration and management commands

to them.

Member management: You can add a device to a cluster or remove a device from

a cluster on the management device. You can also configure management device

authentication and handshake interval for a member device on the management

device.

Cluster-related configurations are described in the following sections.

2.1.2 Cluster Roles

According to their functions and status in a cluster, switches in the cluster play different

roles. You can specify the role a switch plays. A switch also changes its role according

to specific rules.

Following three cluster roles exist: management device, member device, and

candidate device.

Table 2-1

Cluster role

Role

Configurations

Functions

Management
device

Configured with a
public IP address.

Receiving
management
commands from the
public network and
processing the
received commands

Providing management interfaces for
all switches in the cluster

Managing member devices by
redirecting commands

Forwarding commands to the
intended member devices

Neighbor discovery, topology
information collection, cluster
management, cluster state
maintenance, and proxies

Summary of Contents for Quidway S3100 Series



































































































































































































































































































































































































































































































































Search results

Summary of Contents for Quidway S3100 Series

Reviews:

Related manuals for Quidway S3100 Series

Brands by name

Popular brands

Huawei Quidway S3100 Series, Operation Manual

Search results

Summary of Contents for Quidway S3100 Series

Reviews:

Related manuals for Quidway S3100 Series

Brands by name

Popular brands