Huawei PI-DC A11 Product Overview And Installation Manual Download | Manualshive

Page: 1 / 8

background image

OptiX RTN PI-DC A11
Product Overview and Installation Guide

Issue:

04

Date:

2018-10-30

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website:

http://www.huawei.com

Email:

[email protected]

No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved.

01

Safety Precautions

• Always hold an insulated part of the P&E cable. Never touch the RJ45 connector.

• Do not touch the pins inside the P&E port on the PI with your hands or a conductor.

• Be sure to connect the power cables of the PI correctly to the positive and negative terminals of the power supply

device .To prevent damage to power cables or devices caused by short-circuits, install a circuit breaker on the

negative terminal of the power supply device.

• Do not install or remove a live P&E cable.

HUAWEI TECHNOLOGIES CO., LTD .

1
2
3
...
»

Summary of Contents for PI-DC A11









Reviews:

No comments

Related manuals for PI-DC A11

Brand: B&K Pages: 5

Brand: B&K Pages: 28

Brand: Rain Bird Pages: 2

Brand: Gardena Pages: 19

Brand: Jackco Pages: 6

Brand: Haaga Pages: 31

Brand: Nabtesco Pages: 26

Brand: Accurate Technology Pages: 10

Brand: Gage Bilt Pages: 28

Brand: ABB Pages: 4

Pendalyte 40472U

Brand: Lightolier Pages: 3

Brand: Agilent Technologies Pages: 114

Brand: Guyatone Pages: 2

Brand: Croplands Pages: 168

Brand: Hanskamp Pages: 22

ALFW-6LU-5KBZ Series

Brand: Hubbell Pages: 2

Brand: SIMES Pages: 8

Giotto spot 400

Brand: SGM Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands