background image

 
 

Copyright © Huawei Technologies Co., Ltd. 2019. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
 

Trademarks and Permissions

 and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective
holders.
 

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
 

 

 
 
 
 
 

Huawei Technologies Co., Ltd.

Address:

Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website:

https://www.huawei.com

Email:

[email protected]

Issue 01 (2019-09-30)

Copyright © Huawei Technologies Co., Ltd.

i

Summary of Contents for OptiXstar P622E




















Reviews: