1
4
H
ardware Installations
Step 1
Use an
optical fiber
to connect the
optical port
on the ONT.
-The fiber connector connected to the optical port depending on actual conditions.
-To ensure normal use of fibers, make sure that the fiber bend radius is larger
than 30 mm.
Step 2 Use a network cable to connect the
LAN
port to a PC or the Ethernet port on the IP
STB.
Step 3 Use a phone line to connect the
TEL
port to a phone or fax machine.
Step 4 Use a power adapter to connect the
POWER
port to the power socket.
Do not use any power adapters that are not in the standard configuration.
Otherwise, the device
may be abnormal or unsafe.
Step 5 Use a USB data cable to connect the
USB
port to the USB storage device.
Step 6 Press the
ON/OFF
power switch.
Step 7 Press the
WLAN
switch to enable the WLAN function.
- When the WLAN is off, press the WLAN button (> 3s) and release the button to
open the WLAN.
- When the WLAN is on, press the WLAN button (> 3s) and release the button to
close the WLAN.
Step 8 When the WLAN is on, press the
WPS
button (> 3s) and release the button to start
Wi-Fi protected setup (WPS) negotiation.
