
1.1 Equipment Type
The ODU is available in three series: standard power, high power, and low capacity for PDH.
Table 1-1
ODU types
Item
Description
Standard Power
ODU
High Power ODU
Low Capacity for
PDH ODU
ODU type
SP and SPA
HP
LP and LPA
Frequency band
7/8/11/13/15/18/23/
26/38 GHz (SP
ODU)
6/7/8/11/13/15/18/2
3 GHz (SPA ODU)
7/8/10/10.5/11/13/15
/18/23/26/28/32/38
GHz
7/8/11/13/15/18/23
GHz (LP ODU)
7/8/11/13/15/18/23/
26/32/38 GHz (LPA
ODU)
Microwave
modulation mode
QPSK/16QAM/
32QAM/64QAM/
128QAM/256QAM
(SP ODU)
QPSK/16QAM/
32QAM/64QAM/
128QAM (SPA
ODU)
QPSK/16QAM/
32QAM/64QAM/
128QAM/256QAM
QPSK/16QAM
Channel spacing
3.5/7/14/28 MHz
7/14/28/40/56 MHz
3.5/7/14/28 MHz
1.2 Installation Mode
Different installation modes are available for an ODU, depending on the type of antenna
configuration.
There are two methods of mounting the ODU and the antenna: direct mounting and separate
mounting.
l
The direct mounting method is normally adopted when a small-diameter and single-
polarized antenna is used. In this situation, if one ODU is configured for one antenna, the
ODU is directly mounted at the back of the antenna. If two ODUs are configured for one
antenna, an RF signal combiner/splitter (hereinafter referred to as a hybrid coupler) must
be mounted to connect the ODUs to the antenna.
method.
1 ODU
OptiX RTN 600 ODU
Hardware Description
1-2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 06 (2010-05-30)