2.1 Creating NEs
Each piece of equipment is represented as an NE on the U2000. Before the U2000 manages the
actual equipment, you need to create the corresponding NEs on the U2000. There are two NE
creation methods, namely, creating a single NE and creating NEs in batches. When you need to
create a large number of NEs, for example, during the deployment, it is recommended that you
use the method of creating NEs in batches. When you need to create only a few NEs, it is
recommended that you use the method of creating a single NE.
2.1.1 Creating a Single NE
After an NE is created, you can use the U2000 to manage the NE. Creating a single NE is not
as quick and accurate as creating NEs in batches. But you can create a single NE regardless of
whether the data is configured on the NE side.
Prerequisite
l
You must be an NM user with "NM operator" authority or higher.
l
The NE Explorer instance of the NEs must be created.
Background Information
First create a gateway NE, and then create a non-gateway NE.
Procedure
Step 1
Right-click in the blank area of the Main Topology and choose
New
>
NE
from the shortcut
menu. Then, the
Create NE
dialog box is displayed.
Step 2
Select the NE type from the Object Type drop-down list.
Step 3
Set
ID
,
Extended ID
,
Name
, and
Remarks
OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
2 Creating the Network
Issue 02 (2011-06-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2-3