Step 4
Click
Modify...
.
The
Modify Cluster Virtual IP
dialog box is displayed, as shown in
Figure 7-14
Modify Cluster Virtual IP
dialog box
Step 5
For descriptions of the parameters for setting a virtual IP address, see
Description: Modifying a Cluster Virtual IP Address
Step 6
Click
OK
.
The
Info
dialog box is displayed, stating "Operation succeeded."
Step 7
Click
OK
.
----End
7.2.10 Querying Information About a Virtual IP address
This section introduces the procedure for querying information about a virtual IP address.
Procedure
Step 1
In the navigation tree, click the
Logical
tab.
Step 2
In the navigation tree, select the node of the name of the VIS6000.
Step 3
On the menu bar, choose
Configuration
>
Virtual IP Management...
.
The
Configure Cluster Virtual IP
dialog box is displayed, as shown in
Step 4
For descriptions of the parameters for viewing information about the
Configure Cluster Virtual
IP
7.3.6 Parameter Description: Configuring a Cluster Virtual IP
----End
7.2.11 Deleting a Virtual IP Address
This section introduces the procedure for deleting a virtual IP address.
7 Configuring the Data Replication Function
OceanStor VIS6000 Series Virtual Intelligent Storage
System
Initial Configuration Guide
7-20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 08 (2010-05-10)