manualshive.com logo in svg

Huawei OceanStor 18000 V3 Series, Features Manual

The Huawei OceanStor 18000 V3 Series Features Manual is available for free download from manualshive.com. This comprehensive manual provides detailed instructions and insights on maximizing the potential of your Huawei OceanStor 18000 V3 Series product, empowering you to optimize storage performance and ensure seamless operations. Get your free manual now!

Share
Download
background image

admin:/>add white_list sn=XXXXXXXXXXXXXXXXXXXX

Command executed successfully.

3.

(Optional) Run the 

change white_list

 

enable_switch=no

 command to close the whitelist

if you do not need to configure it.

----End

4.4.3 Configuring the Arbitration Software (Ubuntu)

This section describes how to configure the arbitration software in Ubuntu.

Prerequisites

The arbitration software must be configured in user mode.

Procedure

Step 1

Prepare for the configuration.

Before the configuration, make sure that the quorum server has been configured with service
IP address and firewall.

1.

Configure a service IP address for the quorum server.

NOTE

If two ports of the quorum server are not bonded, IP addresses of the two ports must be from different
network segments. If the two ports of the quorum server are bonded, you only need to configure a
virtual IP address for arbitration.

–

When deploying the arbitration software using VMs, you need to create virtual
network adapters and switches for VMs. In this example, arbitration software is
deployed on VMs, and two ports of the quorum server are not bonded. 

Figure 4-4

and 

Table 4-6

 show configuration requirements.

Figure 4-4

 Configuration requirements of virtual network adapters

 

OceanStor V3 Series
HyperMetro Feature Guide for File

4 Configuration

Issue 05 (2018-01-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

76

Summary of Contents for OceanStor 18000 V3 Series





































































































































































































Reviews:

No comments

Related manuals for OceanStor 18000 V3 Series

D-Link DSN-3200 - xStack Storage Area Network Array Hard... Release Notes preview
DSN-3200 - xStack Storage Area Network Array Hard...
Brand: D-Link Pages: 7
IBM System Storage TS2900 Manual preview
System Storage TS2900
Brand: IBM Pages: 130
Maxtor DiamondMax 17 160 ATA Installation And Use Manual preview
DiamondMax 17 160 ATA
Brand: Maxtor Pages: 64
Suncast DB6300 Owner'S Manual preview
DB6300
Brand: Suncast Pages: 8
IBM totalstorage 200 Hardware Installation Manual preview
totalstorage 200
Brand: IBM Pages: 152
Seagate ST940210A Datasheet preview
ST940210A
Brand: Seagate Pages: 2
U-Line S-5188 Quick Start Manual preview
S-5188
Brand: U-Line Pages: 3
Tab e.module L5.1 Operation Manual preview
e.module L5.1
Brand: Tab Pages: 26
Spectra Logic Spectra 2K Library User Manual preview
Spectra 2K Library
Brand: Spectra Logic Pages: 93
Seagate Barracuda 7200.7 ST3120025A Product Manual preview
Barracuda 7200.7 ST3120025A
Brand: Seagate Pages: 58
Zhejiang Longyard Trade Industrial BS-T1B Owner'S Manual preview
BS-T1B
Brand: Zhejiang Longyard Trade Industrial Pages: 18
Medion P83771 Instruction Manual preview
P83771
Brand: Medion Pages: 37
KROFTMAN E509 Installation Manual preview
E509
Brand: KROFTMAN Pages: 31
kincrome Evolution K7916 Operation Manual preview
Evolution K7916
Brand: kincrome Pages: 2
U.S. General 67422 Instructions And Precautions preview
67422
Brand: U.S. General Pages: 2
Brookstone 437590 User Giude preview
437590
Brand: Brookstone Pages: 8
Sony 7819900133 Quick Start Manual preview
7819900133
Brand: Sony Pages: 2
Sony 1GN Operating Instructions preview
1GN
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands