manualshive.com logo in svg

Huawei NE40E-X1, Hardware Description, Page: 42 / 158

Share
Download
Huawei NE40E-X1 Hardware Description Download Page 42

The NPUI-20 consists of the following planes:

l

Control and management plane

Through the management channels between MPUs and NPUI-20s, the MPUs can manage
NPUs and associated subcards, and transmit routing protocol data.

l

Data forwarding plane

The NPUI-20s are responsible for service processing in the entire system, and are connected
to all subcards through data channels.

An NPUI-20 provides two 10G Ethernet optical interfaces that can work in the WAN or
LAN mode and can be installed with XFP optical modules.

Table 2-7

 NPUI-20 parameters

Item

Description

Remarks

Forwarding capability

20 Gbit/s (bidirectional)

-

Interface

Two 10GE XFP optical interfaces that
can work in the LAN or WAN mode

-

 

Figure 2-12

 Appearance of the NPUI-20 panel

1. Ejector lever

2. OFL indicator

3. OFL button

4. L/A1 indicator

5. Optical interface

6. L/A0 indicator

7. ACT indicator

8. STAT indicator

 

Table 2-8

 describes the buttons and indicators on the NPU panel.

Table 2-8

 Description of the buttons and indicators on the NPU panel

Indicator/
Button

Description

STAT
indicator

If the indicator is steady green, it indicates that the NPUIworks normally.
If the indicator is steady red, it indicates that the hardware of the NPU is faulty.
If the indicator blinks green, it indicates that NPU is being registered.
If the indicator is off, it indicates that the NPU is not powered on or fails to be
registered.

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description

2 NE40E-X2 Hardware Description

Issue 02 (2011-09-10)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

34

Summary of Contents for NE40E-X1































































































































































Reviews:

No comments