Huawei NE40E-M2 Series Hardware Description Download Page 63

Page: 63 / 297

7 Boards

Issue ()

Huawei Proprietary and Confidential

Indicator

Status Description

STAT

Status indicator

Green:



If the indicator is steady on, the PIC is working properly.

Red:



If the indicator is steady on, the hardware on the PIC is faulty.

Yellow:



If the indicator is steady on, the PIC is installed in a slot for a
HIC and an alarm is reported or the PIC is not loaded with the
logic.

If the indicator is off, the PIC is powered off or is not registered.

L/A 0-9

Running status indicator

Green:



If the indicator is steady on, the link is normal.



If the indicator is off, the link is Down.



If the indicator blinks, data is being transmitted.

Table 7-21

Service interfaces

Interface

Name

Interfac

e Type

Connec

tor
Type

Description

Cable

OUT0
IN0-OUT9
IN9

10GE/GE SFP+/S

10 interfaces
for 10GE/GE
optical signal
input and
output

LC optical fiber

Functional Specifications

Features and

Functions

Remarks

Basic function

Support for optical signal input and output of 10 10GE/GE interfaces.

Reliability and
availability

Support for hot swap

Restrictions and
Remarks



Not applicable to outdoor scenarios.



The board does not support the OTN mode or FEC function. If a
colored optical module is used and does not support optical
amplifier insertion, the board supports only point-to-point optical
transmission.

Summary of Contents for NE40E-M2 Series










































































































































































































































































































Search results

Summary of Contents for NE40E-M2 Series

Reviews:

Brands by name

Popular brands

Huawei NE40E-M2 Series, Hardware Description

Search results

Summary of Contents for NE40E-M2 Series

Reviews:

Brands by name

Popular brands