Huawei N5368X Quick Start Download Page 5

Areas with Inflammables and Explosives

· 

Do not use the device where inflammables or explosives are stored, for example, in a gas station, oil 

depot, or chemical plant. Otherwise, explosions or fires may occur. In addition, follow the instructions 

indicated in text or symbols.

· 

Do not store or transport the device in containers with flammable liquids, gases, or explosives.

Restrictions

The functions of Wireless Access Systems including Radio Local Area Networks (WAS/RLANs) within the 

band 5150-5350 MHz for this device are restricted to indoor use only within all European Union countries 

(BE/BG/CZ/DK/DE/EE/IE/EL/ES/FR/HR/IT/CY/LV/LT/LU/HU/MT/N-

L/AT/PL/PT/RO/SI/SK/FI/SE/UK/TR/NO/CH/IS/LI).

Environmental Protection (WEEE)

· Do not dispose of the device and its accessories in a garbage can.

· Dispose of the device according to the local regulations on disposing of packing materials and 

abandoned devices. Support proper collection and recycling.

RF Exposure Information

This device meets the EU requirements and the International Commission on Non-Ionizing Radiation 

Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way 

of health protection. This device should be installed and operated with a minimum of 20 cm spacing to 

any person at all times.

EU Regulatory Conformance Statement

Hereby, Huawei Technologies Co., Ltd. declares that the radio equipment type is in compliance with 

Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following 

internet address: www.huawei.com/en/product-certification.

Operating Environment

· In outdoor scenarios, use the device at an ambient temperature of –40ºC to 50ºC. In indoor scenari-

os, use the device at an ambient temperature of 0ºC to 40ºC. An overly high or low ambient tempera-

ture may cause device faults.

· Use the device at an ambient humidity of 5%RH to 100%RH (non-condensing). An overly high or low 

ambient humidity may cause device faults.

· The power supply voltage must meet the requirements for the input voltage of the device.

· Keep the device away from electronic appliances that generate strong magnetic or electric fields, 

such as a transformer, microwave oven, or refrigerator.

· When using the device indoors, avoid dusty, damp, or dirty environments. Using the device in these 

environments may result in circuit malfunctions.

· Keep the device stable to avoid personal injury or device damage.

· Keep the device away from heat sources, flammable materials, or exposed fire sources.

· Do not install the device in areas exposed to acidic, alkaline, or other corrosive gases.

· Keep the device and accessories in a well-ventilated area. Do not enclose or cover your device with 

towels or other objects. Do not place the device in a container with poor heat dissipation, such as a box 

or bag. Poor heat dissipation may damage the device.

· During thunderstorms, power off your device and remove all cables connected to it to protect against 

device faults or lightning strikes.

· Do not place any object (such as a candle or a water container) on the device to avoid risks caused 

by liquid leakage. If any foreign object or liquid enters the device, stop using the device immediately, 

power it off, remove all the connected cables, and then contact your operator.

· The device temperature increases after the device runs for a while. If the device is overheated, avoid 

contacting it for an extended period. Otherwise, low temperature burn symptoms, such as red spots 

and darker pigmentation, may occur.

· In the use of the device, do not touch the cable connectors.

· Do not scratch or damage the device shell. Flaking or peeling of the paint may lead to skin allergy or 

malfunction of the device. If paint flakes and peels drop into the host, a short circuit may occur.

Cleaning and Maintenance

· During storage, transportation, and operation of the device, keep it dry and prevent it from colliding with 

other objects.

· If the device is not going to be used for an extended period of time, power it off and remove all cables 

connected to it.

· Keep the power plug clean and dry to prevent electric shocks or other dangers.

· If any exception occurs, for example, if the device emits any smoke or unusual sound or smell, stop 

using the device immediately, power it off, remove all the cables connected to it, and then contact your 

operator.

· Do not trample, pull, or overbend any cable. Otherwise, the cable may get damaged, causing malfunc-

tion of the device.

· Do not use damaged or aged cables. Using such cables may lead to electric shocks or fire.

· Before cleaning or maintaining the device, stop using it, power it off, and then remove all cables 

connected to it.

· Use a clean, soft, and dry cloth to clean the device shell. Do not use any chemical detergent, powder, 

or other chemical agents to clean the device.

· Do not place magnetic stripe cards, such as credit cards and phone cards, or floppy disks, near the 

device for extended periods of time. Otherwise, the magnetic stripe cards may be damaged or the stored 

data in the floppy disks may be lost.

· Without authorization, no organization or individual can change the mechanical, safety, or performance 

design of the device.

· When using the CPE, observe all applicable laws and regulations and respect the legal rights of other 

people.

Accessory Requirements

NOTE: The accessories of the device include the power adapter, cables, and mounting kits.

Use only the accessories supplied by the device manufacturer. Otherwise, the device may be faulty, 

fail, or even cause fires. Violating the warranty for the device or the laws and regulations related to 

telecommunications terminals may cause injuries.

Copyright © Huawei Technologies Co., Ltd. 2019.All rights reserved.

Children Safety

Keep the device, its accessories, and plastic bags out of the reach of children. Otherwise, they may 

damage the device and its accessories by mistake, or they may swallow the small components of the 

device or put their heads into the plastic bags, causing suffocation or other dangerous situations.

Safety Precautions

8

Before using and operating this device, read the following precautions carefully to ensure optimal 

device performance and avoid dangers or violation of laws and regulations.

Wireless Devices

Do not use this device in areas where the use of wireless devices is prohibited as it may interfere with 

other devices or present other hazards.

Impact on Medical Equipment

Radio waves generated by the device may interfere with the operation of implanted medical appliances 

or personal  medical appliances, such as the pacemakers, cochlear implants, and hearing aids. If such 

appliances are used, consult the appliance manufacturer about the restrictions for using the device.

Summary of Contents for N5368X






Reviews: