background image

 

Copyright ©  Huawei Technologies Co., Ltd. 2012. 

All rights reserved.

 

No part of this document may be reproduced or transmitted in any form or by any means 
without prior written consent of Huawei Technologies Co., Ltd. 

The product described in this manual may include copyrighted software of Huawei 
Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, 
distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, 
or sublicense the said software, unless such restrictions are prohibited by applicable laws or 
such actions are approved by respective copyright holders under licenses. 

Trademarks and Permissions 

, and 

are trademarks or registered trademarks of Huawei 

Technologies Co., Ltd. 

Other trademarks, product, service and company names mentioned are the property of their 
respective owners. 

Notice 

Some features of the product and its accessories described herein rely on the software 
installed, capacities and settings of local network, and may not be activated or may be 
limited by local network operators or network service providers, thus the descriptions herein 
may not exactly match the product or its accessories you purchase. 

Huawei Technologies Co., Ltd reserves the right to change or modify any information or 
specifications contained in this manual without prior notice or obligation. 

NO WARRANTY 

Summary of Contents for MU709Gs-8










Reviews: