HUAWEI ME936 LTE M.2 Module
Hardware Guide
RF Specifications
Issue 03 (2017-12-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
48
4.4 Conducted Rx Sensitivity and Tx Power
4.4.1
Conducted Receive Sensitivity
The conducted receive sensitivity is a key parameter that indicates the receiver
performance of ME936.
The
3GPP Protocol Claim
column in Table 4-2 lists the required minimum values,
and the
Test Value
column lists the tested values of ME936.
Table 4-2
ME936 conducted Rx sensitivity
Band
Typical Value
Note
GSM 850
–109.5
BER Class II < 2.44%
GSM 900
–109.5
BER Class II < 2.44%
DCS 1800
–110
BER Class II < 2.44%
PCS 1900
–109
BER Class II < 2.44%
WCDMA B1 Main Rx
–110.5
BER < 0.1%
WCDMA B2 Main Rx
–110
BER < 0.1%
WCDMA B4 Main Rx
–110.5
BER < 0.1%
WCDMA B5 Main Rx
–110.5
BER < 0.1%
WCDMA B8 Main Rx
–111
BER < 0.1%
LTE B1 RX
–101
Throughput ≥ 95%, 10 MHz Bandwidth
LTE B2 RX
–101.5
Throughput ≥ 95%, 10 MHz Bandwidth
LTE B3 RX
–101
Throughput ≥ 95%, 10 MHz Bandwidth
LTE B4 RX
–101
Throughput ≥ 95%, 10 MHz Bandwidth
LTE B5 RX
–101
Throughput ≥ 95%, 10 MHz Bandwidth
LTE B7 RX
–99.5
Throughput ≥ 95%, 10 MHz Bandwidth
LTE B8 RX
–102
Throughput ≥ 95%, 10 MHz Bandwidth
LTE B13 RX
–100
Throughput ≥ 95%, 10 MHz Bandwidth
LTE B17 RX
–102
Throughput ≥ 95%, 10 MHz Bandwidth
LTE B20 RX
–101.5
Throughput ≥ 95%, 10 MHz Bandwidth
1. Sensitivity of WCDMA and GSM are tested in the main port.
2. LTE sensitivity is tested in SIMO (Main + AUX), BW=10 MHz.
