8
1.
Connect device cables.
2.
Configure the computer's IP address so that the IP addresses of the computer
and the device are in the same network segment.
Note:
z
The device's default IP address is 192.168.1.1, the subnet mask is
255.255.255.0.
z
It is recommended that you use the automatically obtained IP addresses for the
computer and domain name system (DNS) server. If you manually configure
the computer IP address, you must set the DNS server IP address to the
device IP address. Otherwise, you will fail to log in to the web management
page.
3.
Open the browser, and enter
http://192.168.1.1
in the address box.
4.
Enter the user name and password to log in to the web management page.
Note:
z
The default user name is
admin
.
z
The default password is
admin
.
If your connection jumps between the 4G, 3G and 2G networks
In the 4G router setup manager you can lock the router to a particular network (only
possible when disconnected):
Select
Internet
from the menu in the upper part, then go to
Network Connection
in
the left menu. Select
Network Mode
and one of the preferred modes:
Auto, 4G, 3G
or
2G
.
The WiFi Router supports the following frequency bands
x
FDD LTE 800/900/1800/2100/2600 MHz, TDD LTE 2600 MHz
x
DC-HSPA+/HSPA+/HSPA/UMTS 900/2100 MHz
x
EDGE/GPRS/GSM 850/900/1800/1900 MHz
Summary of Contents for LTE CPE E5172
Page 1: ......
Page 11: ...TSP 2993_2 1206 ...
