Huawei Iris Hellas SUN2000 Series User Manual Download Page 35

Page: 35 / 123

Figure 4-11

Installing the mounting bracket

----End

4.4.2 Wall-mounted Installation

Wall-mounted Installation

Step 1

Install the mounting bracket.

WARNING

Avoid drilling holes in the water pipes and power cables buried in the wall.

NO TICE

● To prevent dust inhalation or contact with eyes, wear safety goggles and an

anti-dust respirator when drilling holes.

● Clean up any dust in and around the holes using a vacuum cleaner and

measure the distance between holes. If the holes are inaccurately positioned,

drill a new set of holes.

● Level the head of the expansion sleeve with the concrete wall after removing

the bolt, spring washer, and flat washer. Otherwise, the mounting bracket will

not be securely installed on the wall.

SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1

User Manual

4 Installation

Issue 05 (2020-08-30)

Summary of Contents for Iris Hellas SUN2000 Series




























































































































Search results

Summary of Contents for Iris Hellas SUN2000 Series

Reviews:

Related manuals for Iris Hellas SUN2000 Series

Brands by name

Popular brands

Huawei Iris Hellas SUN2000 Series, User Manual

Search results

Summary of Contents for Iris Hellas SUN2000 Series

Reviews:

Related manuals for Iris Hellas SUN2000 Series

Brands by name

Popular brands