Step 5
Connect the power cable, network cable, and the audio/alarm cables.
NOTE
Use a plier to remove the removable part and route the cables via side outlet (as shown in Figure below)
if no cable hole is drilled in
, and connect the corresponding cables.
Figure 3-5
Remove the Removable Part
Step 6
View the image via the web browser.
Step 7
Slightly loosen the hex screw beside the WPS/RESET button to adjust the surveillance angle.
Step 8
Use the supplied adjusting tool to adjust the pan [±30°], tilt [0°~80°], and rotation direction [0°
~360°].
Figure 3-6
3-axis Adjustment
Step 9
Tighten the hex screw to fix the well-adjusted surveillance angle.
Step 10
Align the front cover to the dome drive and tighten the set screws on the front cover.
IPC6332-MIR
Quick Start Guide
3 Installation
Issue 02 (2014-12-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
