Parameter
Description
Privacy
This parameter is available only when you set
Version
to
v3
and
Security level
to
Authentication and privacy
.
Key used for IPC authentication.
NOTE
It is recommended that the key meet the following conditions:
l
The key consists of 8 to 20 characters.
l
The key contains at least two types of the following: lowercase
letters (a to z), uppercase letters (A to Z), digits (0 to 9), and special
characters (including the space character and the following: `~!@#$
%^&*()-_=+\|[{}];:'",<.>/?).
l
The key must be different from the user name or the reverse text of
the user name.
l
To improve security, the value of
Privacy
must be different from
Authentication protocol
.
Step 4
Click
OK
.
The
SNMP Parameters page
is displayed.
Step 5
Click
Save
.
----End
7.6.3 Configuring SNMP v3 User Information
When SNMP v3 is used, the NMS visits the IPC using a user account in secure access mode.
Different user accounts have different access rights.
Context
When SNMP v3 is used, you can configure a maximum of three SNMP v3 users. This section
mainly describes how to add a new SNMP v3 user.
Procedure
Step 1
Choose
Settings
>
Network Configuration
>
SNMP Parameters
.
The
SNMP Parameters
page is displayed, as shown in
.
Figure 7-13
SNMP Parameters page
IPC6122-P
Configuration Guide
7 Setting Network Parameters
Issue 02 (2016-04-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
57
