IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
7 Installing the Access Control System
Issue 02 (2015-06-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
108
1.
Check whether the magnet provides magnetic force by attaching magnetizable iron parts
to it.
2.
Check whether the magnetic lock faces the magnet.
3.
Check whether a gap exists between the magnetic lock and the magnet.
If any of the preceding conditions occur, the magnet lock cannot work properly, and you need
to adjust the magnet as follows:
1.
Check the circuit and rectify any faults.
2.
Adjust the magnet base and door panels to ensure that the magnet faces the magnetic
lock. A little position deviation is allowed.
3.
If a gap exists between the magnetic lock and the magnet, rectify the fault by following
the instructions in
4.
If the magnet is not level, use a spacer shown in
levelness.
Figure 7-11
Adjusting the gap between a magnetic lock and a magnet
Figure 7-12
Spacer
