Huawei IdeaHub Board Edu Quick Start Manual Download Page 7

Statement on a Class A Product

This is a class A product. In a domestic environment this product may cause radio 

interference in which case the user may be required to take adequate measures.

Angaben zu einem Produkt der Klasse A

Hierbei handelt es sich um ein Produkt der Klasse A. In einer häuslichen 

Umgebung verursacht dieses Produkt möglicherweise Funkstörungen, gegen die 

der Nutzer geeignete Maßnahmen ergreifen muss.

            This symbol on the device and any included batteries indicates that they should not be disposed of as 

normal household garbage. Do not dispose of your device or batteries as unsorted municipal waste. They should 

be handed over to a certified collection point for recycling or proper disposal when they can no longer be used.

For more detailed information about the recycling of the device or batteries, contact your local city office, the 

household waste disposal service, or the retail store where you purchased this device.

The disposal of this device is subject to the Waste from Electrical and Electronic Equipment (WEEE) Directive of 

the European Union. The purpose for separating WEEE and batteries from other waste is to minimize any 

environmental impact and health hazards due to the presence of hazardous substances.

Reduction of Hazardous Substances

This device is compliant with the EU Registration, Evaluation, Authorization and Restriction of Chemicals 

(REACH) Regulation (Regulation No 1907/2006/EC of the European Parliament and of the Council) and the EU 

Restriction of Hazardous Substances (RoHS) Directive (Directive 2011/65/EU & (EU) 2015/863 of the European 

Parliament and of the Council). For more information about the REACH compliance of the device, visit 

www.huaweidevice.com/certification. You are recommended to visit the website regularly for up-to-date 

information.

Disposal and Recycling Information

Statements

SDoC

 Tips and Tricks

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia 

Interface, and the HDMI Logo are trademarks or registered 

trademarks of HDMI Licensing Administrator, Inc. in the United States 

and other countries.

Exploring Wonderful Features

6

For more information, visit 

https://support.huawei.com/enterprise/en

.

Summary of Contents for IdeaHub Board Edu








Reviews: