Huawei HG523, User Manual

Page: 14 / 26

9
mode drop-down combo box.
t.
e
.
6. Select Route from the Connection
7. Select PPPoE option button for Connection type .
8. Select Enable check box for NAT .
9. Enter the user name and password that are provided by the network
operator in the
User name and Password text boxes, and keep the default
settings of other parameters.
10. Click Submit to save the settings.
After you complete the preceding settings, you can surf the Interne
You need to perform the preceding operations on a computer once only. The next tim
when you power on your computer, you can surf the Internet without any configuration
3.2
Accessing the Network Through the PPP
Dial-Up Software on Your Computer
the network access, do as follows:
e HG523." Note that Bridge is selected from the Mode drop-down
combo bo
Step 2
t
The PPP d
create a d
perating system as
an example):
ard window, and then click Next .
5. requires a user
6. name (as desired) of the dial-up connection in ISP Name , and
r and
If you select this method for accessing the network, you need to install and configure
the dial-up software on your computer. In addition, you need to perform dial-up
operations on your computer upon each startup. To configure the HG523 and your
computer for
Step 1
Set the working mode of the HG523 to Bridge .
For details, refer to the procedure for enabling the embedded dial-up function described
in Step 2 in section
3.1 "Accessing the Network Through the Embedded PPP Dial-Up
Software on th
x.
all and configure the PPP Ins dial-up software on your computer.
ial-up software is pre-installed on certain computer operating systems. To
ial-up connection, do as follows (taking the Windows XP o
1. Choose Start > All Programs > Accessories > Communications >
Network Connections .
2. Click Create a new connection in Network Tasks to display the New
Connection Wiz
3. Select Connect to the Internet , and then click Next .
4. Select Set up my connection manually , and then click Next .
Select Connect using a broadband connection that
name and password , and then click Next .
Enter the
then click
Next .
7. Select Anyone's use or My use only , and then click Next .
8. Enter the user name and password provided by the network operato
used for the dial-up connection, and then click
Next .