Huawei FusionServer RH2288H V3 Installation Manual Download Page 3 | Manualshive

Page: 3 / 46

Huawei FusionServer RH2288H V3 Installation Manual Download Page 3

Huawei SAP HANA Appliance Single Node Installation
Guide (RH2288H V3+BrSLES11 SP4 For B1)

About This Document

Issue 01 (2017-01-06)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

ii

About This Document

Purpose

This document describes the software and hardware planning of the Huawei RH2288H V3
Broadwell SAP HANA appliance, how to install a redundant array of independent disks
(RAID) controller card, SUSE for SAP OS, Peripheral Component Interconnect Express
(PCIe) solid-state drive (SSD), and SAP HANA database, and how to verify the installation.

By reading this document, audience can learn about the SAP HANA software and hardware,
and how to install a RAID controller card, OS, PCIe SSD driver, and SAP HANA database in
sequence (which cannot be changed).

Intended Audience

This document is intended for:



Technical support engineers



Maintenance engineers



Users

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal

«
1
2
3
4
5
...
»

Summary of Contents for FusionServer RH2288H V3















































Reviews:

No comments