Huawei FusionServer Pro CH121 V5 User Manual Download Page 89

Page: 89 / 181

Figure 4-9

Querying version information

Pay attention to the following information:

–

CPLD Version

: CPLD version of the compute node

–

Active iBMC Version

: version of the iBMC in the active work space of the

compute node

–

Backup iBMC Version

: version of the iBMC in the standby work space of the

compute node

Check whether the versions meet site requirements.

–

If yes, go to

Step 4

–

If no, go to

Step 3.4

Upgrade the iBMC, BIOS, or CPLD.
For details, see

E9000 Server V100R001 Upgrade Guide

Step 4

Query health status.

Step 5

Query alarm information.

Click the compute node in the specific slot and choose

Alarm List

Figure 4-10

Querying alarm information

Check whether any alarm is generated.

–

If yes, handle the alarms.

FusionServer Pro CH121 V5 Compute Node
User Guide

4 Installation and Configuration

Issue 06 (2019-08-10)

Summary of Contents for FusionServer Pro CH121 V5






















































































































































































Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands

Huawei FusionServer Pro CH121 V5, User Manual

Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands