Huawei FusionServer Pro CH121 V5 User Manual Download Page 47

Page: 47 / 181

Step 10

Install the cover.

For details, see

3.6 Installing the Cover

Step 11

Install the compute node.

For details, see

3.4 Installing a CH121 V5

Step 12

Power on the compute node.

For details, see

3.2 Power-On Procedure

----End

3.9 Removing the PCIe Card Panel

Procedure

Step 1

Power off the compute node.

For details, see

3.1 Power-Off Procedure

Step 2

Remove the compute node.

For details, see

3.3 Removing a CH121 V5

Step 3

Place the compute node on the ESD workstation.

Step 4

Remove the cover.

For details, see

3.5 Removing the Cover

Step 5

Determine the position of the PCIe card panel.

Step 6

Loosen the two screws that secure the PCIe card panel and lift the PCIe card panel vertically.
See (1) and (2) in

Figure 3-15

Removing a PCIe card panel

FusionServer Pro CH121 V5 Compute Node
User Guide

3 Basic Operations

Issue 06 (2019-08-10)

Summary of Contents for FusionServer Pro CH121 V5






















































































































































































Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands

Huawei FusionServer Pro CH121 V5, User Manual

Search results

Summary of Contents for FusionServer Pro CH121 V5

Reviews:

Related manuals for FusionServer Pro CH121 V5

Brands by name

Popular brands