Huawei FusionServer Pro CH121 V5 V100R005, Maintenance And Service Manual

Page: 94 / 192

Step 2 Remove the compute node.
For details, see 3.3 Removing a CH121 V5 .
Step 3 Place the compute node on the ESD workstation.
Step 4
Remove the cover.
For details, see 3.5 Removing the Cover .
Step 5
Remove the air duct.
For details, see 3.7 Removing the Air Ducts .
Step 6
Check whether a PCIe card is installed.
l If yes, go to Step 7 .
l If no, go to Step 8 .
Step 7 Remove the PCIe card.
For details, see 3.11 Removing a PCIe Card .
Step 8
Determine the position of the memory module.
Figure 4-39 Memory slots
Step 9 Remove the memory module.
1. Open the memory module ejectors on the memory slot. See (1) in Figure 4-40 .
2. Remove the memory module from the slot. See (2) in Figure 4-40 .
FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
4 Parts Replacement
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 86