1
PSU indicator
2
UID indicator
3
Serial port indicators
NOTE
The indicators are reserved.
4
Connection status
indicator for the
management network
port
5
Data transmission status
indicator of the
management network
port
6
LOM indicators
7
OCP 2.0 mezzanine card
indicators
-
-
Indicator Description
Table 5-3 Indicators on the rear panel
Indicator
Description
PSU indicator
● Off: No power is supplied.
● Blinking green at 1 Hz:
– The input is normal, and the server is standby.
– The input is overvoltage or undervoltage.
– The PSU is in deep hibernation mode.
● Blinking green at 4 Hz: The firmware is being
upgraded online.
● Steady green: The power input and output are
normal.
● Steady orange: The input is normal, but no power
output is supplied.
NOTE
The possible causes of no power output are as follows:
● Power supply overtemperature protection
● Power output overcurrent or short-circuit
● Output overvoltage
● Short-circuit protection
● Device failure (excluding failure of all devices)
Huawei FusionServer Pro 2298 V5 Server
Technical White Paper
5 Hardware Description
Issue 05 (2020-09-03)
Copyright © Huawei Technologies Co., Ltd.
14
