Huawei ETS2506, User Manual

Page: 58 / 79

9 Message
HUAWEI
50
z
[ Forward ]: The display screen shows the message to be forwarded-Press
< OK > and enter a telephone number (or press < MENU > to find your desired
telephone number)-Press < OK > and choose priority;
z
[ Dial ]: Dial out the corresponding telephone number;
z
[ Save Number ]: Enter the name, and then press < OK > to save the contact
entry to the phone book;
z
[ Delete ]: Delete the message;
z
[ Delete All ]: Delete all messages. Press < OK > to confirm, or press < END > to
exit;
5. and then press < OK >.
Or in the standby state, press < OK > to read new messages.
Writing a Message
After you enter the "Messages" interface,
1. Find [ New Message ], and then press < OK >;
2. Enter the message content, and then press < OK >;
3. In the "Number" input interface, you can select one of the following
operations:
z
Enter the telephone number, and then press < OK >;
z
Press < MENU > to find your desired telephone number;
z
Press < OK >;
4. Enter the settings of delivery priority. You can select "Normal", "Urgent" or
"Emergency", and then press <
OK > to send the short message.
Voice Mailbox
The voice message can be received either by the ordinary message inbox or by
the voice mailbox. For the specific receiving method, consult the local carrier.
When a voice message comes, the screen will display . To receive a voice
message through the voice mailbox, follow the steps below.
After you enter the "Messages" interface,
1. Find [ Voice Mail ], and then press < OK >;
2. If there are voice messages, the screen will display the related information
about the voice messages.