Installing UIM Card (Optional)
Caution:
y
Whether an UIM card is needed, consult your service provider for details.
y
The UIM card and its golden contact can be easily damaged by scratch or
bending. Thus, be careful when installing or removing the UIM card.
After power off the FWT and disconnect the power, install or remove the UIM card. Make sure
that the golden contact of the UIM card is facing downwards.
Installing the Battery
Note:
y
The FWT can be powered by the power adapter or the battery.
y
Before replacing the battery, disconnect the outdoor antenna.
y
When the FWT installed with the battery is powered by the power adapter, the
battery is auto charged. After the battery is fully charged, the charging stops.
y
Before using the battery for the first time, charge the battery for at least eight
hours. When the battery is fully charged but not used for a long time, charge it for
five minutes before you can use it again normally.
After power off the FWT and disconnect the power, install the battery. When installing the
battery, make sure the battery cord plug matches the battery jack. Do not insert conversely.
Installing the Antenna
Note:
For details of antenna selection and installation, consult your local dealer.
Power off the FWT. Then connect the indoor antenna with the antenna jack on the main unit.
Screw the antenna to make sure that the antenna is tightly connected with the antenna jack.
Placing the FWT
Horizontally
Place the FWT on the flat surface. Select a cool and ventilated site to dissipate heat.
