Huawei ES3000 V5 User Manual Download Page 85

Page: 85 / 248

For Ubuntu or Debian, run

dpkg -i driver package name

An example package name for Ubuntu is

dpkg -i

hiodriver-5.0.3.3-3.13.0_24_generic.ubuntu.amd64.deb

Step 4

Check whether the following message indicating an incorrect upgrade package is displayed.

Error: The installing package does not match the current OS. Please execute
command: rpm -e kmod-hiodriver to uninstall the installing rpm.

If yes, go to

Step 5

If no, go to

Step 6

Step 5

Uninstall the installed package as prompted. Upload the correct upgrade package for the OS
to the server and perform

Step 2

again to install the package.

Step 6

Check whether the following message is displayed. The message indicates that the original
NVMe driver fails to be uninstalled during the upgrade.

Warning: fail to uninstall the old nvme kernel module. Please uninstall the old
nvme kernel module manually or reboot the system.

If yes, go to

Step 9

If no, go to

Step 7

Check whether the following message is displayed. The message indicates that the new
NVMe driver fails to be installed during the upgrade.

Warning: fail to install the new nvme kernel module. Please install the new nvme
kernel module manually or reboot the system.

If yes, go to

Step 8

If no, go to

Step 12

Step 8

Check whether restarting the OS will affect services.

If yes, go to

Step 11

If no, restart the OS and go to

Step 12

Step 9

Check whether restarting the OS will affect services.

If yes, go to

Step 10

If no, restart the OS and go to

Step 12

Step 10

Run the

modprobe -r nvme

command to uninstall the original driver. During the

uninstallation, check whether a message is displayed indicating that the driver is in use. If yes,
the uninstallation fails.

If yes, restart the OS and go to

Step 12

If no, go to

Step 11

Run the

modprobe nvme

command to install the new driver. Check whether a warning or

error is displayed during the installation.

If yes, restart the OS and go to

Step 12

If no, go to

Step 12

Run the

modinfo nvme

command to check the version information to determine whether the

driver is successfully upgraded.

If the version number in the command output is the target version number, the upgrade is
successful.

The following is an example command:

ES3000 V5 NVMe PCIe SSD
User Guide

5 Maintenance and Upgrade

Issue 07 (2019-03-19)

Summary of Contents for ES3000 V5

























































































































































































































































Search results

Summary of Contents for ES3000 V5

Reviews:

Related manuals for ES3000 V5

Brands by name

Popular brands

Huawei ES3000 V5, User Manual

Search results

Summary of Contents for ES3000 V5

Reviews:

Related manuals for ES3000 V5

Brands by name

Popular brands