Huawei ES3000 V5 User Manual Download Page 28

Page: 28 / 248

Parameter

Specifications

Humidity

Storage humidity: 5% RH to 95% RH

Operating humidity: 5% RH to 95% RH

Vibration

Operating vibration: 2.17 G

RMS

(5 Hz to 700 Hz)

Non-operating vibration: 3.13 G

RMS

(5 Hz to 800 Hz)

Shock

Operating shock: 1000 G/0.5 ms

Non-operating shock: 1000 G/0.5 ms

2.5 System Requirements

This section describes the ES3000 V5 requirements for server software and hardware.

Hardware Requirements

The minimum requirements for server hardware are as follows:

2 GB memory

To use the ES3000 V5 NVMe PCIe SSD disk, the server must provide at least one 2.5-
inch SSD disk slot that supports the PCIe SFF-8639 connector.

To use the ES3000 V5 NVMe PCIe SSD card, the server must provide at least one
HHHL (167.5 mm x 70 mm x 18.6 mm) PCIe 3.0 x4 card slot.

Software Requirements

Use the

Huawei Server Compatibility Checker

to check the OS types and versions

supported by the ES3000 V5.

OSs listed in this section support common I/O services. To obtain the list of OSs that
support hot swap, see

4.1 OSs Supporting Hot Swap

. To obtain the list of OSs that can

be installed on the ES3000, see

G Installing an OS on the ES3000

ES3000 V5 NVMe PCIe SSD
User Guide

2 Getting to Know the ES3000 V5

Issue 07 (2019-03-19)

Summary of Contents for ES3000 V5

























































































































































































































































Search results

Summary of Contents for ES3000 V5

Reviews:

Related manuals for ES3000 V5

Brands by name

Popular brands

Huawei ES3000 V5, User Manual

Search results

Summary of Contents for ES3000 V5

Reviews:

Related manuals for ES3000 V5

Brands by name

Popular brands