Huawei ES3000 V5 User Manual Download Page 106

Page: 106 / 248

Figure 5-8

Removing a drive

Step 3

Holding onto the drive ejector lever, pull out the drive. See (2) and (3) in

Figure 5-8

Step 4

Place the removed drive into an ESD bag.

----End

5.12.2 Removing a Hot Swappable ES3000 V5 NVMe PCIe SSD
Disk

Prerequisites

Check that the current environment supports

4.1 OSs Supporting Hot Swap4.1 OSs

Supporting Hot Swap

Wear ESD gloves.

Procedure

Step 1

Determine the position of the drive in the server and stop the services on the drive to be
removed.

Step 2

Perform operations described in

4.2 Orderly Hot Swap

Step 3

Press the ejector release button. See (1) in

Figure 5-9

ES3000 V5 NVMe PCIe SSD
User Guide

5 Maintenance and Upgrade

Issue 07 (2019-03-19)

Summary of Contents for ES3000 V5

























































































































































































































































Search results

Summary of Contents for ES3000 V5

Reviews:

Related manuals for ES3000 V5

Brands by name

Popular brands

Huawei ES3000 V5, User Manual

Search results

Summary of Contents for ES3000 V5

Reviews:

Related manuals for ES3000 V5

Brands by name

Popular brands