manualshive.com logo in svg

Huawei eRRU Series, Quick Installation Manual, Page: 13 / 16

Share
Download
Huawei eRRU Series Quick Installation Manual Download Page 13

Auxiliary mounting bracket 

12 

     1. Bind the RRU and the main and auxiliary mounting brackets properly using a lifting sling. 

2. Use a fixed pulley to hoist the RRU and mounting kits 

onto the tower separately. 

1. After climbing up to the tower, installation engineer A secures the fixed pulley to the tower platform support and 

leads the lifting sling through the fixed pulley.  

2. Installation engineer C binds the eRRU and mounting kits using the lifting sling and secures the traction sling to the 

RRU handle.  

3. Installation engineer B pulls the lifting sling downwards, and installation engineer C pulls the traction sling outwards 

to protect the RRU and mounting kits from colliding with the tower.  

4. Installation engineer A catches the RRU and mounting kits and then unties the sling.  
The preceding hoisting procedure is for reference only. 

• When hoisting the RRU and mounting kits onto the tower, 

protect them from colliding with the tower. 

• Hoist the RRU onto the tower before it is installed on a pole. 

Hoisting the eRRU and Mounting Kits 

a 

Appendix  

Do not hoist only the RRU hander onto the tower. Do 
not fasten the lifting sling on the cable cavity hander. 
Otherwise, the lifting sling may fall down, thereby 
damaging devices or causing personal injuries. 

Main mounting bracket 

NOTE 

WARNING 

CAUTION 

Summary of Contents for eRRU Series

















Reviews:

No comments