NOTE
l
The PLOAM protocol is defined in the ITU-T G.984.3 and is used for the operation, maintenance, and
management of the physical layer.
l
OMCI is a master-slave management protocol. The OLT is the master device; the ONT is the slave
device. The OLT controls multiple ONTs through the OMCI channel.
----End
3.2 Configuring the Service Through the N2000 BMS
This topic describes how to configure the CATV service and upgrade the ONT through the
N2000 BMS.
Context
To upgrade the ONT remotely through the NMS on the OLT side, do as follows:
3.2.3 Collecting the Fault Information
When the GPON service is faulty, you need to collect the fault information through the NMS.
3.2.1 CATV Service
Context
For details on configuring the CATV service on the N2000 BMS, see sections GPON Service
Profile and GPON ONT Capability Profile in the
Configuration Guide
.
TIP
The parameters related to the CATV service are
Number of CATV Ports
in the GPON service profile and
Number of CATV ANI Ports
and
Number of CATV UNI Ports
in the GPON ONT capability profile.
3.2.2 Upgrading the ONT
To upgrade the ONT remotely through the NMS on the OLT side, do as follows:
Procedure
Step 1
On the
Physical Map
navigation tree on the
Main Topology
tab page, double-click the required
OLT; or select the required OLT, right-click, and then choose
Device Management
.
Step 2
Choose
GPON
>
GPON ONU
from the navigation tree on the tab page that is displayed.
Step 3
On the
GPON ONU
tab page, set the querying criteria to display the required GPON ONUs.
Step 4
Select a required ONU from the list, right-click, and then choose
Upgrade Terminal
.
NOTE
The NMS version is R12C03.
----End
EchoLife HG861 GPON Terminal
3 Configuration Guide
Issue 01 (2009-07-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-3
