Huawei EchoLife HG861 Manual Download Page 13 | Manualshive

Page: 13 / 58

background image

1

Safety Precautions

To ensure normal running of the device, read the safety precautions carefully before operating
on the device, and comply with the precautions when performing the operations.

Basic Requirements

l

Keep the device dry during storage, transportation, and running of the device.

l

Prevent the device from colliding with other objects during storage, transportation, and
running of the device.

l

Install the device in strict compliance with the vendor requirements.

l

Do not uninstall the device without permission. Contact the specified service center when
a fault occurs on the device.

l

No enterprise or personnel should modify the structure, and security and performance
design of the device without authorization.

l

Abide by the local laws and regulations and respect the legal rights of others when using
the device.

Environment Requirements

l

Install the device in a well-ventilated place that is not directly exposed to sunlight.

l

Keep the device clean.

l

Keep the device away from water sources or wet places.

l

Do not place any objects on the device to prevent the device from being damaged by heat
or weight of the object placed on the device.

l

Leave a space of at least 10 cm around the device for heat dissipation.

l

Keep the device away from heat sources or bare fire sources, such as electrical heaters and
candles.

l

Keep the device away from the electrical appliances with strong magnetic fields or strong
electric fields, such as microwave ovens, refrigerators, and mobile phones.

Instruction for Use

l

Use the accessories delivered with the device, or use those recommended by the vendor,
such as the power adapter and battery.

EchoLife HG861 GPON Terminal

1 Safety Precautions

Issue 01 (2009-07-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

1-1

«
...
11
12
13
14
15
...
»

Summary of Contents for EchoLife HG861



























































Reviews:

No comments

Related manuals for EchoLife HG861

Brand: H3C Pages: 22

Brand: H3C Pages: 3

Brand: Queclink Pages: 9

Brand: Profile Pages: 6

HAWA-Frontside 60/B

Brand: hawa Pages: 28

Brand: SMART Pages: 15

AT-9424Ts/XP AC

Brand: Allied Telesis Pages: 3

LoadMaster 1500

Brand: KEMP Technologies Pages: 71

Brand: Alesis Pages: 61

OP-8000-EDFA-1U Series

Brand: Optostar Pages: 9

Brand: ADS Technologies Pages: 1

SmartNode 4520 Series

Brand: Patton electronics Pages: 90

TD-3316B4-16P-A1

Brand: TVT Digital Pages: 2

Brand: ETAS Pages: 82

Brand: H3C Pages: 9

Brand: MICROENER Pages: 24

Brand: Talent Pages: 18

zoomno MSC-5578

Brand: BIIZZY Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands