Huawei EchoLife HG8240 Service Manual Download Page 312

Page: 312 / 358

Figure 5-3

VoIP Information - H.248

If the VoIP service needs to be restarted, click

Reset VoIP

in the pane on the right.

5.1.3 Wi-Fi Information

In the navigation tree on the left, choose

Status

Wi-Fi Information

. Then, in the pane on the

right, you can query the information such as Wi-Fi port status, Wi-Fi packet statistics, and SSID,
as shown in

Figure 5-4

Wi-Fi Information

In the pane on the right, click

Enable

Disable

to enable or disable the Wi-Fi function.

Click the link in blue to go to the corresponding configuration page.

5 Web Page Reference

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

5-4

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Summary of Contents for EchoLife HG8240







































































































































































































































































































































































Search results

Summary of Contents for EchoLife HG8240

Reviews:

Huawei EchoLife HG8240, Service Manual, Page: 312 / 358

Search results

Summary of Contents for EchoLife HG8240

Reviews: