EchoLife HG556 Home Gateway
User Guide
FAQs
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-3
Step 5
P dialing software.
Step 6
Che
he terminal is
erform further checks as
tes,
re the default settings of the terminal.
twork service provider.
Step 7
igured. Take the
1.
5.
In the
Proxy server
group box of the
Local Area Network (LAN) Settings
dialog
t apply
n access.
8.3 W
Internet through a wire
Step 2
N function.
Step 3
cription of the wireless network adapter that is installed on the computer and
802.11b and 802.11g protocols.
d 802.11g protocols,
For details about how to set the parameters, see the description of the PPP dialing
software.
Ensure that you have entered the correct user name and user password that are required
by the PP
The user name and the user password are provided by your network service provider.
ck whether you can use the PPP dialing software to dial successfully (t
configured as Bridge mode).
If you cannot use the PPP dialing software to dial successfully, p
follows:
1.
Stop the PPP dialing software and then power off the terminal. After five minu
power on the terminal and use the PPP dialing software to dial again.
2.
Resto
If the problem persists, contact your ne
Check whether the proxy server of the Web browser is correctly conf
Internet Explorer installed on a computer that runs Windows XP as an example. To
check whether the proxy server of the Web browser is correctly configured, do as
follows:
Start the Internet Explorer.
2.
Choose Tools > Internet Options.
3.
In the
Internet Options
dialog box, click the
Connections
tab.
4.
In the Local Area Network (LAN) settings group box, click LAN settings.
box, ensure that
Use a proxy server for your LAN (These settings will no
to dial-up or VPN connections)
is not selected.
Step 8
Try to access multiple other Web sites to check whether the terminal ca
If the terminal still cannot access other Web sites, contact your network service provider.
hat can I do if the terminal cannot access the
less network adapter?
Step 1
Ensure that the power cables and telephone lines of the terminal are properly connected.
Check whether the WIFI indicator of the terminal is on.
If the WIFI indicator is off, you can infer that the wireless local area network (WLAN)
function of the terminal is disabled. In this case, enable the WLA
For details about how to enable the WLAN function, see the manual of the terminal.
See the des
check whether the wireless network adapter supports the
If the wireless network adapter does not support the 802.11b an
replace it with the network adapter that supports the protocols.
