33
11
or
assigning I addresses in a LAN. DHCP automatically assigns IP addresses to the network
devices.
ou are using the DHCP server, you need to do the following configurations on
, refer to "Configuring the PC Network."
Assigning IP Addresses
In the dynamic host configuration protocol (DHCP) settings page, you can set the mode f
P
If y
the PC connecting with the gateway. For details
Click
to open the DHCP setting page.
y
t mask is
255.255.255.0
.
t
y
s.
y
IP Address
: The default IP address of the gateway is
192.168.1.1
.
Subnet Mask
: The combination of the subnet mask and IP address enables the flexible
subnetting. By default, the subne
y
DHCP Server
: It is used to assign IP addresses dynamically. If the DHCP server is
Enabled
, it can automatically assign IP addresses for PCs. It is recommended to selec
Disabled
for the DHCP server.
Start IP Address& End IP Address
: It is used to define the IP address range that the
host can use during the IP address assignment. For example, in the network segment
192.168.1.0/24, the default IP address of the E960 is 192.168.1.1. The host IP address
can range from 192.168.1.2 to 192.168.1.254. The minimum range is a single IP addres