Thank you for choosing the Mobile Broadband
USB Stick. With your USB Stick, you can access
a wireless network at high speed.
Note:
This manual describes the appearance of the USB Stick, as well as the
procedures for preparation, installation, and removal. For operation details
about the management program, see the online help included in the
management program.
Getting to Know Your USB Stick
The following figure shows the appearance of the USB Stick. It is provided
only for your reference. The actual product may be different.
1
2
3
4
n
USB Connector
It connects the USB Stick to a PC.
o
Indicator
It indicates the status of the USB Stick.
z
Green, blinking twice every 3s: The USB Stick is powered on.
z
Green, blinking once every 3s: The USB Stick is registered to the
GSM/GPRS/EDGE network.
z
Blue, blinking once every 3s: The USB Stick is registered to the
WCDMA/HSPA network.
z
Green, always on: The GPRS/EDGE connection is set up.
z
Blue, always on: The WCDMA connection is set up.
z
Cyan, always on: The HSPA connection is set up.
z
Off: The USB Stick is removed from the PC.
p
MicroSD Card Slot
It holds a microSD card.
q
USIM/SIM Card Slot
It holds a Subscriber Identity Module (SIM)/ Universal Subscriber Identity
Module (USIM) card.
Getting Your USB Stick Ready
1.
Slide the back cover to remove it from the USB Stick.
2.
Insert the USIM/SIM card and the microSD card into the
corresponding card slots, as shown in the following figure.
3.
Replace the back cover and slide it into place.
