Huawei CX600-16, Hardware Description

Page: 37 / 132

NOTE
Slot number: On the CX600-X16, the slots of LPUs are numbered from 1 to 16. The slot number increases
from left to right and from top to bottom, facing the front panel of the CX600 (there are corresponding
marks on the panel).
Card number:
l Upper chassis
l The cards of LPUs are numbered from top to bottom and from right to left beginning with 0. If
there is no card on a board, the card number is set to 0.
l Lower chassis
l
The cards of LPUs are numbered from bottom to top and from left to right beginning with 0. If
there is no card on a board, the card number is set to 0.
Port number:
l Upper chassis
l The ports of LPUs are numbered from left to right and from top to bottom beginning with 0.
l Lower chassis
l The ports of LPUs are numbered from right to left and from bottom to top beginning with 0.
Table 3-1 describes the slot layout on the CX600-X16.
Table 3-1 Board distribution in the board cage of the CX600-X16
Slot
Number Quant
ity Slot Width Remarks
1 to 16 16 41 mm (1.6 inches) These slots are used to hold LPUs.
17 to 18 2 41 mm (1.6 inches) These slots hold MPUs that work in 1:1
backup mode.
19 to 22 4 41 mm (1.6 inches) These slots are used to hold SFUs that work
in 3+1 load balancing mode.
3.1.3 CX600-X16 Specifications
This section describes the system configuration and physical parameters of the CX600-X16.
Chassis Specifications
Table 3-2 lists the physical parameters of the CX600-X16.
Table 3-2 Physical parameters of the CX600-X16
Item Description
Dimensions (H x W x D) 1420 mm x 442 mm x 650 mm (55.91 in. x 17.40 in. x
25.59 in.) (chassis main body dimensions)
1420 mm x 442 mm x 770 mm (55.91 in. x 17.40 in. x
30.31 in.) (chassis dimensions including the chassis's
front and rear assembly and cable racks)
HUAWEI CX600-8/16/X3/X8/X16 Metro Service Platform
Hardware Description
3 CX600-X16
Issue 03 (2013-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18