Quidway® NetEngine 5000E Core Router 10GE Optical Interface Boards
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved.
http://www.huawei.com/products/datacomm/
2
Currently, the NE5000E provides two types of 10GE optical interface boards: 1-port and 2-port. The
first type uses pluggable XFP optical modules, and the latter type uses fixed optical modules.
Before networking, you must first choose between 10G LAN board and 10G WAN board based on
their differences, then choose between 1-port and 2-port 10GE optical interface boards based on
network requirements, and finally choose between pluggable XFP optical modules and fixed optical
modules for the 10G optical interface board based on transmission distance requirements.
Specifications
Currently, the NE5000E supports three types of 10G LAN boards and three types of 10G WAN
boards. Among them, two use pluggable XFP optical modules (2-port), and the other four use fixed
optical modules (1-port). The specifications are listed below:
Module name
Interface type
Description
CR52K-2x10GE-LAN-XFP LC
2-port 10G LAN Ethernet optical interface
board: Different XFP optical modules can be
chosen for different transmission distances.
CR52K-10GE-LAN-10KM LC
1-port 10G LAN Ethernet optical interface
board: The center wavelength is 1310 nm, and
the maximum transmission distance is 10 km.
CR52K-10GE-LAN-40KM LC
1-port 10G LAN Ethernet optical interface
board: The center wavelength is 1550 nm, and
the maximum transmission distance is 40 km.
CR52K-2x10GE-WAN-XFP LC
2-port 10G WAN Ethernet optical interface
board: Different XFP optical modules can be
chosen for different transmission distances.
CR52K-10GE-WAN-10KM LC
1-port 10G WAN Ethernet optical interface
board: The center wavelength is 1310 nm, and
the maximum transmission distance is 10 km.
CR52K-10GE-WAN-40KM LC
1-port 10G WAN Ethernet optical interface
board: The center wavelength is 1550 nm, and
the maximum transmission distance is 40 km.
