No.
Indicator/Button
Color
Description
4
Service port
indicator (10GE
optical port)
NOTE
Each 10GE optical
port has two single-
color indicators. The
one on the left is the
ACT indicator
(yellow), and the one
on the right is the
LINK indicator
(green).
Arrowheads show
the positions of ports.
A down arrowhead
indicates a port at the
bottom, and an up
arrowhead indicates
a port at the top.
Green
l
Off: The port is not connected or has been shut
down.
l
Steady on: A link is established on the port.
Yellow
l
Off: The port is not sending or receiving data.
l
Blinking: The port is sending or receiving data.
5
Service port
indicator (40GE
optical port)
NOTE
Arrowheads show
the positions of ports.
A down arrowhead
indicates a port at the
bottom, and an up
arrowhead indicates
a port at the top.
-
Off: The port is not connected or has been shut
down.
Green
l
Steady on: A link is established on the port.
l
Blinking: The port is sending or receiving data.
When a 40GE port is configured as four 10GE ports, this
indicator shows the status of a 10GE port. The sequence
number of the indicated 10GE port is identified by indicators
40GE Breakout 1/2/3/4 on the lower right corner of the panel.
NOTE
Each 40GE port has a single-color indicator, which shows the status
of the 40GE port by default.
If a 40GE port is not split and is connected to four 10GE ports on a
remote device using a one-to-four high-speed cable, the 40GE port
cannot go Up and its indicator is off.
6
40GE Breakout
1/2/3/4 (sequence
number indicators of
10GE ports
converted from a
40GE port)
NOTE
Indicators 1, 2, 3, 4
turn on in cyclic
order, with each
indicator keeping on
for 5s.
-
Off: 40GE ports are not split into four 10GE ports.
CloudEngine 7800&6800&5800 Series Switches
Hardware Description
2 Chassis
Issue 16 (2015-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
67