background image

 

16

 

z

 

If there is battery leakage, smoke, or strange smell, stop using the battery and 
keep it away from open flame to avoid fire or explosion. Then turn to an 
authorized maintenance engineer for help. 

z

 

If the battery fluid contacts your skin or cloth, wash with clean water 
immediately to avoid irritation to the skin. 

z

 

If the battery fluid gets into eyes, do not rub your eyes. Otherwise, your eyes 
can be hurt. Wash with clean water and go to see a doctor immediately. 

z

 

If there is battery deformation, color change or abnormal heating while you 
charge or store the battery, take it out immediately and stop using it. 
Otherwise, battery leakage, overheat, explosion, or fire may occur. 

z

 

When installing the battery, do not push the battery by force lest battery fluid 
leak out or the battery crack. 

z

 

Do not take out the battery when the phone is turned on. 

z

 

If you do not use the battery for a long time, store it in normal temperature 
after charging. 

Charger 

z

 

Use the charger approved by the phone manufacturer only. Any violation of 
this rule may result in fire or malfunction of the charger. 

z

 

Do not short-circuit the charger. Short-circuiting the charger may cause fire or 
malfunction of the charger. 

z

 

If the power cord is damaged (for example, the lead is exposed or broken), or 
the plug becomes loose, stop using the cable at once. Otherwise, electric 
shock, short-circuit of the charger, or fire may occur. 

z

 

Keep the charger dry. Once water or other liquid leaks into the charger, 
electrical leakage or other faults may occur. 

z

 

Do not use the charger in a dusty and damp environment. Keep the power 
cord away from any heating appliance. 

z

 

Ensure the charger is properly plugged into the power socket properly when 
charging the battery. Improper insertion may result in electric shock, fire, or 
explosion. To unplug the charger, pull the plug off rather than tear the power 
cord. 

z

 

Use the AC power supply defined in the specifications of the charger. An 
improper power voltage can cause fire or malfunction of the charger. 

z

 

Do not place any heavy object on the power cord of the charger. Do not 
damage, change, or pluck the power cord. Otherwise electric shock or fire 
may occur. 

z

 

When you are charging the battery with the charger, do not touch the plug, 
power cord or the charger with a wet hand. Otherwise, electric shock can be 
caused. 

 

17

 

z

 

Once the liquid such as water leaks into the charger, remove the plug of the 
charger from the socket immediately. Otherwise, overheating, fire and other 
malfunction may occur. 

Certification Information (SAR) 

THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS 
FOR EXPOSURE TO RADIO FREQUENCY 
ELECTROMAGNETIC FIELD. 

Your mobile phone is a low-power radio transmitter and receiver. When it is 
turned on, it emits low levels of radio frequency energy (also known as radio 
waves or radio frequency fields). 

Governments around the world have adopted comprehensive international safety 
guidelines, developed by scientific organizations, e.g. ICNIRP (International 
Commission on Non-Ionizing Radiation Protection) and IEEE (Institute of 
Electrical and Electronics Engineers Inc.), through periodic and thorough 
evaluation of scientific studies. These guidelines establish permitted levels of 
radio wave exposure for the general population. The levels include a safety 
margin designed to assure the safety of all persons, regardless of age and health, 
and to account for any variations in measurements. 

Specific Absorption Rate (SAR) is the unit of measurement for the amount of 
radio frequency energy absorbed by the body when using a mobile phone. The 
SAR value is determined at the highest certified power level in laboratory 
conditions, but the actual SAR level of the mobile phone while operating can be 
well below the value. This is because the mobile phone is designed to use the 
minimum power required to reach the network. 

All models of Huawei's mobile phone are designed to meet radio frequency 
exposure guidelines. Before a phone model is available for sale to the public, it 
must be tested and certified to the FCC that it does not exceed the limit 
established by the government-adopted requirement for safe exposure. The tests 
are performed in positions and locations (that is, at the ear and worn on the body) 
as required by the FCC for each model. For body worn operation, this phone has 
been tested and meets FCC RF exposure guidelines when the handset is 
positioned a minimum of 15 mm from the body with an accessory that contains 
no metal part. Use of other accessories may not ensure compliance with FCC RF 
exposure guidelines. 

The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) 
averaged over one gram of tissue. The highest SAR value reported to the FCC and 
IC for this device type when tested for use at the ear is 0.502 W/kg, and when 
properly worn on the body is 0.381 W/kg. 

Summary of Contents for c3308











Reviews: