Figure 3-28
LBBPd panel
NOTE
The LBBPd1, LBBPd2, and LBBPd3 have silkscreens
LBBPd1
,
LBBPd2
, and
LBBPd3
indicating their
board types on the lower left corner of the board panel, respectively.
Functions
The LBBP performs the following functions:
l
Processes uplink and downlink baseband signals.
l
Provides CPRI ports for communication with RF modules.
Indicators
On the LBBP panel, there are three indicators, as described in
.
Table 3-50
Indicators on the LBBP panel
Silkscreen
Color
Status
Description
RUN
Green
Steady on
There is power supply, but the
board is faulty.
Steady off
There is no power supply, or the
board is faulty.
On for 1s and off for 1s
The board is functioning
properly.
On for 0.125s and off for
0.125s
l
The board is being loaded or
configured.
l
The board is not started.
ALM
Red
Steady on
An alarm is generated, and the
board must be replaced.
Steady off
The board is running properly.
On for 1s and off for 1s
An alarm is generated, and you
need to locate the fault before
deciding whether to replace the
board.
ACT
Green
Steady on
The board serves as an active
board.
BTS3900C (Ver.C)
Hardware Description
3 BTS3900C Modules
Issue 03 (2013-05-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
65
