Huawei baudcom HG8245H5, Quick Start Manual

Page: 7 / 15

● The fiber connector connected to the optical port on the wall varies depending on
actual conditions.
● To ensure normal use of fibers, make sure that the fiber bending radius is larger than 30
mm.
No. Item Description
1 On/Off Powers the ONT on or off.
2 Power Connects to a power adapter.
3 TEL1-
TEL2
Connects to the ports on a telephone or fax machine.
4 LAN1-
LAN4
Connects to PCs or IP set-top boxes (STBs).
5 Optical
port
The optical port is equipped with a rubber plug and
connected to a fiber for upstream transmission.
The type of the optical connector connected to the optical
port can be SC/APC.
6 Reset Press the button for a short time to reset the device; or
press the button for a long time (longer than 10s) to
restore the device to the default settings and reset the
device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to
access the Internet. If an ONT cannot access the Internet after a
reset, contact your Internet service provider.
7 USB Connects to USB storage devices.
8 WPS When the WLAN is on, press the WPS button (> 3s) and
release the button to start Wi-Fi protected setup (WPS)
negotiation.
9 WLAN Used to enable or disable the WLAN function
- When the WLAN is disabled, press the WLAN button (>
3s) and release the button to enable the WLAN.
- When the WLAN is enabled, press the WLAN button (>
3s) and release the button to disable the WLAN.
HG8245H5
Quick Start 2 Connecting Cables
Issue 01 (2020-04-22) Copyright © Huawei Technologies Co., Ltd. 4