MAIN
DIV
LAN1
LAN2/WAN
TEL
The Ethernet cable is an optional accessory. To buy an Ethernet cable, please contact an authorized retailer.
FAQs
How do I restore factory settings?
When the router is turned on, press the Reset button for approximately 3 seconds using a pointed object until the power
indicator turns off. Restoring factory settings will restore the settings to the default. You can reconfigure them after the router
is restored.
What should I do if I forgot the Wi-Fi password or the login password for the web-based
management page?
Restore the router to its factory settings and then use the default Wi-Fi password and login password to try again.
What should I do if the MODE indicator is red or an Internet connection cannot be established?
1
Check if the SIM card is inserted. Refer to the Setup section for the right size of SIM card and the right way to insert it into
the slot.
2
If the issue persists, restore the router to factory settings and try again.
3
Contact your carrier to check if your SIM card is out of service. If it's a new card, check if it has been activated.
What should I do if the Internet speed is slow?
1
Check the signal indicators on the router. If it shows weak signal, adjust the router's direction or move it close to a window
to improve signal reception.
2
If your device is connected to the router over Wi-Fi, adjust your device's position to receive better signal.
3
Switch to Wi-Fi 5 GHz if it is supported by your device.
4
Restart the router and your device, and try again.
5
Check if you have reached your data traffic limit for the month. If so, your carrier may limit your Internet speed.
How can I connect to the router using WPS (Wi-Fi Protected Setup)?
To connect a WPS-enabled device to your router using the Hi/WPS button:
1
Press and hold the Hi/WPS button on the router for at least 1 second and then release, the Wi-Fi indicator starts to blink.
2
Enable WPS on your device within 2 minutes to connect to the router's Wi-Fi network.
Why can't I access the router's web-based management page?
1
Ensure that your computer is connected to the router through an Ethernet cable or Wi-Fi.
2
Ensure that your computer is set to obtain an IP address and DNS server address automatically.
3
Restart your browser, or try using another browser.
4
If the problem persists, restore the router to its factory settings.
Why is the content displayed on the web-based management page not up to date?
Depending on your browser's cache, the content for your device on the web-based management page may not be up to date.
Manually clear your browser's cache (for example, open your browser and choose
Internet Options
>
General
>
Browsing
history
>
Delete
.) and re-launch the web-based management page.
Does my router support 5 GHz Wi-Fi? How do I connect to its 5 GHz Wi-Fi?
1
Yes. Your router supports 5 GHz Wi-Fi, which is faster and less sensitive to interference. However, it does not penetrate
walls as well as 2.4 GHz Wi-Fi and can only be used on devices that support 5 GHz Wi-Fi.
5