LTE CPE B2338-168
Quick Start Guide
2 ODU and IDU Panels
Issue Draft A (2016-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
1.
Phone: Connect your telephone to indoor device with an RJ-11 telephone cable.
2.
WPS button: Enable the user to configure WiFi security on WPS-enabled devices.
3.
LAN ports: Connect PC, Hub, switch or other network equipment by using RJ-45
Ethernet cable.
4.
PoE port: Connect with ODU RJ-45 connector.
5.
Reset button: To reboot the device, press and hold the reset button less than 5 seconds.
To reset the device to factory defaults, press and hold the reset button more than 5
seconds.
6.
Power switch: Power on or power off.
7.
Power port: Connect the power adapter.
2.3 IDU Front Panel
.
IDU
LED Indicators as the following table.
No.
LED name
Color
LED Behavior Status Indication
1
Main Power
Green
On
Power On
Off
Power Off
2
System
Green
On
System is connected
Blinking
System is upgrading
Off
System is disconnected
3
LTE SIGNAL
STRENGTH
Green
On
Display signal Strength
1 LED: SINR< 0dB
2 LEDs: 0dB ≤ SINR < 4dB
3 LEDs: 4dB ≤ SINR < 9dB
