Huawei ATN 905 Product Description Download

Page: 46 / 78

Status Description

Indication

On (orange)

The logic is not loaded.

Off

The device is not powered on.

The device is not started.

Table 4-12

Descriptions of the power status indicator (PWR)

Status Description

Indication

On (green)

The power supply is normal.

Off

There is no power feeding into the device.

The power supply fails.

Table 4-13

Descriptions of the electrical interface connection status indicator (LINK)

Status Description

Indication

On (green)

The port physical connection is normal.

Off

The port physical connection fails.

Table 4-14

Descriptions of the electrical interface data receiving and transmission status

indicator (ACT)

Status Description

Indication

Blinking (orange)

The service port is receiving or transmitting data.

Off

The service port receives or transmits no data.

Table 4-15

Descriptions of the port connection status or data receiving and transmission status

indicator (L/A)

Status Description

Indication

On (green)

An optical fiber or cable is correctly connected to the service
port.

Blinking (orange)

An optical fiber or electrical cable is correctly connected to the
service port, and the service port is receiving or transmitting
data.

On (red)

The input optical power was too low.

ATN 905 Multi-service Access Equipment
Product Description

4 Hardware Structure

Issue 01 (2013-05-30)

Huawei Proprietary and Confidential

Summary of Contents for ATN 905















































































Search results

Summary of Contents for ATN 905

Reviews:

Related manuals for ATN 905

Brands by name

Popular brands

Huawei ATN 905, Product Description

Search results

Summary of Contents for ATN 905

Reviews:

Related manuals for ATN 905

Brands by name

Popular brands