Use the Phillips screwdriver to install two M4x8 pan
head screws in the marked positions on the wall,
and leave 2 mm of the screws out of the wall.
Hang the router on the M4x8 pan head screws
through mounting holes on the mounting bracket.
Fasten the M4x8 pan head screws with the Phillips
screwdriver.
3
4
5
2mm
3
4
5
4
Use a Phillips screwdriver to fix the mounting bracket on the rear of the router with four countersunk
M3x6 screws.
Use a measuring tape to determine the two mounting bracket installation positions. Keep the two
positions on a horizontal line and mark the positions with a marker.
1
2
Scenario 2: Mounting the Router on a Wall
Before drilling holes on a wall, make sure there are no power cables in the wall to avoid electric shock.
Take water-proofing measures to protect a wall-mounted router from damages caused by water.
Screws must be installed solid in the wall; otherwise, the wall-mounted router may fall down after cables are
connected.
Ensure that there are no flammable or explosive materials near the router and no obstructions within 100 mm
around the router.
CAUTION
74mm
Horizontal mount
ing
NOTE
Before install the mounting bracket on an AR502CG-L
router, remove the DIN mounting kit at the back of the
router.
NOTE
The center distance between the two mounting holes
for the mounting bracket is 74 mm.
