![Huawei AR2500 Manual Download Page 112](http://html.mh-extra.com/html/huawei/ar2500/ar2500_manual_169300112.webp)
Table 3-96
LTE antenna interface attributes
Attribute
Description
Connector type
SMA-K (screw threads outside and a hole
inside)
Standards compliance
l
GSM/GPRS/EDGE: bands 2/3/5/8
l
WCDMA/HSDPA/HSUPA/HSPA+:
bands 1/8
l
LTE FDD: band 3
Maximum rate
l
Global System for Mobile
Communications circuit switched (GSM
CS): uplink rate of 14.4 kbit/s and
downlink rate of 14.4 kbit/s
l
General Packet Radio Service (GPRS):
uplink rate of 85.6 kbit/s and downlink
rate of 85.6 kbit/s
l
Enhanced Data Rates for GSM
Evolution (EDGE): uplink rate of 236.8
kbit/s and downlink rate of 236.8 kbit/s
l
Wideband Code Division Multiple
Access circuit switched (WCDMA CS):
uplink rate of 64 kbit/s and downlink
rate of 64 kbit/s
l
WCDMA packet switched (PS): uplink
rate of 384 kbit/s and downlink rate of
384 kbit/s
l
High Speed Packet Access Plus (HSPA
+): uplink rate of 5.76 Mbit/s and
downlink rate of 21.6 Mbit/s
l
Dual Carrier High Speed Packet Access
Plus (DC-HSPA+): uplink rate of 5.76
Mbit/s and downlink rate of 42 Mbit/s
l
Frequency Division Duplex-Long Term
Evolution (LTE FDD): uplink rate of 50
Mbit/s and downlink rate of 150 Mbit/s
Network protocol
LTE, WCDMA, GSM
Antenna type
l
l
6.3.3 LTE Indoor Remote Antenna
l
DI/DO Interface
The DI/DO interfaces are used to detect voltage level signals or deliver instructions.
lists DI/DO interface attributes.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06)
Copyright © Huawei Technologies Co., Ltd.
183