manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 187

Patch Status

Description

Patch Status Transition

Running

A patch file is in the running state
when it is stored in the patch area
and run permanently. If a board is
reset, the patch files in the running
state on the board remain in the
running state.

A patch file in the running state can
be deleted from the patch area in
memory.

 

Figure 9-1

 shows patch status transition.

Figure 9-1

 Patch status transition

Upload and 

Run patch

Delete patch

Patch Status:

Patch Status:

none

running

 

9.1.4 CPU and Memory Usage Thresholds

Configuring CPU and memory usage thresholds allows CPU and memory usage and system
performance to be monitored.

l

A log is recorded when CPU usage exceeds the configured threshold.
If CPU usage exceeds the threshold, an alarm will be generated and logged. You can query
the log to know CPU usage.

l

A log is recorded when memory usage exceeds the configured threshold.
If memory usage exceeds the threshold, an alarm will be generated and logged. Users can
query the log to know memory usage.

9.1.5 Device Restart

A device can be restarted immediately or as scheduled.

In some special cases, for example, during system upgrade, the router must be restarted to make
the configuration take effect.

In addition to powering off a device, the AR2200 supports the following methods of restarting
the router:

l

Immediate restart

l

Scheduled restart

9.2 Activating a GTL License File

A GTL license file is an authorization file that controls the capacity and functions of a device.

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

9 Upgrade and Maintenance

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

176

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands