Huawei AR120&AR150&AR160&AR200&AR510
Series Enterprise Routers
Safety and Regulatory Compliance Information
2 Regulatory Compliance Information
Issue 06 (2015-05-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19
AR120&AR150&AR160&AR200&AR510 Series Products comply with Directive
2002/95/EC, on the RoHS in electrical and electronic equipment. The device does not contain
lead, mercury, cadmium, and hexavalent chromium and brominated flame retardants
(polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE)) except for
those exempted applications allowed by RoHS directive for technical reasons.
AR120&AR150&AR160&AR200&AR510 Series Products comply with Directive
2002/96/EC on waste electrical and electronic equipment. Huawei is responsible for recycling
its end-of-life devices. Contact Huawei local service center when recycling is required.
The main materials in the device are steel, plastics, copper, and electronic components. Most
of the materials are recyclable.
Comply with the following rules for recycling at the end of life of the device.
Remove power first in the disassembly.
Remove and send battery
、
PCB
、
fans and cables to special institution for disposal
because it contains chemical substance.
Dispose of battery separately because it contains hazardous substance.
No hazardous substance is contained in the label printing ink and plastic paint, and no
hazardous gas is emitted when the label printing ink and plastic paint is burning.
Dispose of the yellow chromate conversion coating screw separately because it contains
Cr
6+
.
Provide the plastic marking reference, such as ISO1043, and EN50419.
2.3 USA Regulatory Compliance
2.3.1 FCC Part 15
AR120&AR150&AR160&AR200&AR510 Series Products comply with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
This device does not cause harmful interference.
This device must accept any interference received, including interference that may cause
undesired operation.
This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the device is operated in a
commercial environment.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. This equipment should be installed
and operated with a minimum distance of 20 centimeters between the radiator and your
body.
WARNING
